165 resultaten
Onderstel Upgrades Skoda Octavia MK1
FILTERMENU
FWD = A892-**** (Powerflex)
AWD = A893-**** (Powerflex)
VOLLEDIGE TEKST
PFF85-441 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for Petrol models and high-torque tuned Diesel models. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The...
€ 36,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-441BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the followin...
€ 39,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-441 uses our Grey70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for Petrol models and high-torque tuned Diesel models. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The ha...
€ 36,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-441R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the g...
€ 36,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-441R uses our softest Grey 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the ...
€ 36,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Lower Engine Mount Small Bush Diagram Reference: 10 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :1J0199851 OEM 2 :1K0199855 OEM 3 :
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Lower Engine Mount Small Bush Diagram Reference: 10 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :1J0199851 OEM 2 :1K0199855 OEM 3 :
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Lower Engine Mount Small Bush Diagram Reference: 10 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :1J0199851 OEM 2 :1K0199855 OEM 3 :
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
€ 60,33
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Exhaust Mount Diagram Reference: Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :712770470 / 1756516020 OEM 2 :1H0253147B / 1H0253147C / 20650D0101 OEM 3 :255047 / 17565-28010
€ 18,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 32,89
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 101,06
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
€ 44,79
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Ste...
€ 67,37
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainle...
€ 67,37
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610.
€ 48,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK.
€ 53,36
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610.
€ 48,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410
€ 48,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK
€ 53,36
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
