25180 resultaten
Powerflex 2024 - PU Bussen en Rubbers
FILTERMENU
De voordelen van Powerflex :
- - Verlengde levensduur van de banden
- - Verbeterde prestaties
- - Verhoging van de veiligheid
- - Een grotere kosteneffectiviteit
Powerflex Black Series - Voor circuit en race applicatie's de beste keuze
Heritage Series - Voor OldTimers
Gebruik onze selectie wizard om bij de onderdelen uit te komen welke geschikt zijn voor uw type auto
VOLLEDIGE TEKST
Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between ...
€ 66,36
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Yellow 70A material, PFF85-704 is recommended for standard/mildly tuned petrol vehicles and tuned diesel vehicles from mid-2008 on. For vehicles up to mid-2008 use PFF85-504.
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our hardest Black 95A material, PFF85-704BLK fits vehicles from mid-2008 and is recommended for Competition use. For vehicles up to mid-2008 use PFF85-504BLK. Being a stiffer material additional NVH may be experienced when fitting this part.
€ 47,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Purple 80A material, PFF85-704P is recommended for track driven and higher-tuned vehicles from mid-2008 on. For vehicles up to mid-2008 use PFF85-504.Being a stiffer material additional NVH may be experienced when fitting this part.
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made from our softer Red 65A material for less NVH, PFF85-704R fits standard diesel vehicles from mid-2008 on. For vehicles up to mid-2008 on use PFF85-504R.
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G.
€ 76,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Leaf Spring Bush Diagram Reference: 10 Aantal Nodig: 4 Pack Size: 4 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :6K9 501 541 OEM 2 : OEM 3 :
€ 46,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Leaf Spring Bush Diagram Reference: 10 Aantal Nodig: 4 Pack Size: 4 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :6K9 501 541 OEM 2 : OEM 3 :
€ 51,69
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Leaf Spring Chassis Shackle Bush Diagram Reference: 11 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :2K0511171B OEM 2 : OEM 3 :
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Leaf Spring Chassis Shackle Bush Diagram Reference: 11 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :2K0511171B OEM 2 : OEM 3 :
€ 57,72
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part fits 20mm diameter anti roll bars. Please check anti roll bar diameter before ordering.
€ 28,17
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part fits 20mm diameter anti roll bars. Please check anti roll bar diameter before ordering.
€ 31,00
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part fits 22mm diameter anti roll bars. Please check anti roll bar diameter before ordering.
€ 28,17
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part fits 22mm diameter anti roll bars. Please check anti roll bar diameter before ordering.
€ 30,64
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reactio...
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reac...
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs.
€ 123,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs.
€ 123,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
