25180 resultaten
Powerflex 2024 - PU Bussen en Rubbers
FILTERMENU
De voordelen van Powerflex :
- - Verlengde levensduur van de banden
- - Verbeterde prestaties
- - Verhoging van de veiligheid
- - Een grotere kosteneffectiviteit
Powerflex Black Series - Voor circuit en race applicatie's de beste keuze
Heritage Series - Voor OldTimers
Gebruik onze selectie wizard om bij de onderdelen uit te komen welke geschikt zijn voor uw type auto
VOLLEDIGE TEKST
Please check anti roll bar diameter before ordering
€ 31,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Lower Engine Mount Small Bush Diagram Reference: 10 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :1J0199851 OEM 2 :1K0199855 OEM 3 :
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Lower Engine Mount Small Bush Diagram Reference: 10 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :1J0199851 OEM 2 :1K0199855 OEM 3 :
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Lower Engine Mount Small Bush Diagram Reference: 10 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :1J0199851 OEM 2 :1K0199855 OEM 3 :
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between ...
€ 60,33
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between ...
€ 66,36
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G.
€ 76,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK.
€ 83,56
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
€ 60,33
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 32,89
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 101,06
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This kit is suitable for Petrol vehicles only Included within this pack are the following parts:PFF85-201Front Wishbone Front BushPFF85-410Front Wishbone Rear BushPFR85-610Rear Beam Mounting BushPFF85-420Front Engine Mount Dog BonePFF85-505Front Engine Mount Dog Bone Small BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available.
€ 362,20
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
€ 44,79
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Ste...
€ 67,37
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainle...
€ 67,37
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon and Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon and Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610.
€ 48,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK.
€ 53,36
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610.
€ 48,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410
€ 48,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK
€ 53,36
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
