25180 resultaten
Powerflex 2024 - PU Bussen en Rubbers
FILTERMENU
De voordelen van Powerflex :
- - Verlengde levensduur van de banden
- - Verbeterde prestaties
- - Verhoging van de veiligheid
- - Een grotere kosteneffectiviteit
Powerflex Black Series - Voor circuit en race applicatie's de beste keuze
Heritage Series - Voor OldTimers
Gebruik onze selectie wizard om bij de onderdelen uit te komen welke geschikt zijn voor uw type auto
VOLLEDIGE TEKST
PFF5-4634 Shift Arm Front Bush Ultra-Oval replaces the soft OE rubber bush fitted at the end of the gear shifter arm, a part often overlooked when upgrading transmission components. Made in our Black 95A durometer material, it eliminates play in the shifter assembly to restore precision and provide a more direct feel to enjoy fast and smooth shifting through the gears.
€ 30,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF5-4634 Shift Arm Front Bush Ultra-Oval replaces the soft OE rubber bush fitted at the end of the gear shifter arm, a part often overlooked when upgrading transmission components. Made in our Black 95A durometer material, it eliminates play in the shifter assembly to restore precision and provide a more direct feel to enjoy fast and smooth shifting through the gears.
€ 30,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Tuneable engine mounts to suit your driving demands. This mount uses a combination of our Red 65A and Purple 80A materials and can be stiffened further using the Black 95A pins. It fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit any 4-cyl petrol models. An increase in NVH, usually at idle, should be expected when stiffening the ...
€ 261,00
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
Tuneable engine mounts to suit your driving demands. This mount uses our Black 95A material and can be stiffened further using the Black 95A pins. It fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit any 4-cyl petrol models. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the en...
€ 287,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
Made in our Red 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radiat...
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made in our Grey 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radia...
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Designed with fast road driving in mind to replace the tear-prone soft rubber factory transmission mounts, a common cause of knocking, mis-shifting and over-revving. Fits RWD vehicles only. Made using CNC machined Aluminium Caps with captive securing bolts and a Yellow 70A Durometer polyurethane body, they increase stiffness over OE by 150%, whilst minimising NVH transmission.They are also the per...
€ 58,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Designed with motorsports use in mind to replace the tear-prone soft rubber factory transmission mounts, a common cause of knocking, mis-shifting and over-revving. Fits RWD vehicles only. Made using CNC machined Aluminium Caps with captive securing bolts and a Black 95A Durometer polyurethane body, they increase stiffness over OE by 375% for complete control over powertrain movement.They are also ...
€ 64,98
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Designed with fast road driving in mind to replace the tear-prone soft rubber factory transmission mounts, a common cause of knocking, mis-shifting and over-revving. Fits RWD vehicles only. Made using CNC machined Aluminium Caps with captive securing bolts and a Yellow 70A Durometer polyurethane body, they increase stiffness over OE by 150%, whilst minimising NVH transmission.They are also the per...
€ 58,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Designed with trackdays in mind to replace the tear-prone soft rubber factory transmission mounts, a common cause of knocking, mis-shifting and over-revving. Fits RWD vehicles only. Made using CNC machined Aluminium Caps with captive securing bolts and a Purple 80A Durometer polyurethane body, they increase stiffness over OE by 260% for razor-sharp engine response.They are also the perfect accompa...
€ 58,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. FF5-470 vs. Plastic BMW...
€ 31,29
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF5-5601 is a high performance option to PFF5-4601, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting o...
€ 98,74
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF5-5601 is a high-performance option to PFF5-4601 and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on...
€ 108,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu c...
€ 98,74
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbon...
€ 108,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF5K-4601 Front Wishbone Rear Bush and Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from...
€ 90,90
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF5K-4601 Front Wishbone Rear Bush and Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from...
€ 99,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
It will not fit E24 6 series models built before 05/1982.
€ 36,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
It will not fit E24 6 series models built before 05/1982.
€ 39,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
It will not fit E24 6 series models built before 05/1982.
€ 28,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
It will not fit E24 6 series models built before 05/1982.
€ 31,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-3608 uses our Black Series 95A material for ultimate chassis control and durability for the rear trailing arm bush, a common failure point on many BMW vehicles.
€ 49,30
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-3608 uses our Black Series 95A material for ultimate chassis control and durability for the rear trailing arm bush, a common failure point on many BMW vehicles.
€ 49,30
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Front Bush Diagram Reference: 10 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :33316770783 / 33316770784 OEM 2 :33316770816 / 33316770815 OEM 3 :
€ 77,54
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
