25180 resultaten
Powerflex 2024 - PU Bussen en Rubbers
FILTERMENU
De voordelen van Powerflex :
- - Verlengde levensduur van de banden
- - Verbeterde prestaties
- - Verhoging van de veiligheid
- - Een grotere kosteneffectiviteit
Powerflex Black Series - Voor circuit en race applicatie's de beste keuze
Heritage Series - Voor OldTimers
Gebruik onze selectie wizard om bij de onderdelen uit te komen welke geschikt zijn voor uw type auto
VOLLEDIGE TEKST
This bush fits 4 wheel drive models only up to 28.5.2012.
€ 87,92
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush fits 4 wheel drive models only up to 28.5.2012.
€ 91,69
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush fits 4 wheel drive models only up to 28.5.2012.
€ 100,84
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush uses our Purple 80A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and subframe location.
€ 71,29
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush uses our Black 95A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and subframe location.
€ 78,41
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush uses our Purple 80A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and subframe location.
€ 67,37
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush uses our Black 95A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and subframe location.
€ 74,12
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 32,89
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 101,06
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This pack fits the following vehicles, fitted with OEM lower engine mount 5Q0 198 037 A:Audi TT Mk3 (up to 06/2015)Audi A3 8V (up to 06/2015)Audi A3 8V (after 06/2015) FWD up to 1.6 Petrol (Multilink Rear Suspension)Audi A3 8V (after 06/2015) AWD (except RS3)Seat Leon Mk3 (up to 2016)Seat Leon Mk3(after 2016) FWD up to 1.6 Petrol (Multilink Rear Suspension)Seat Leon Mk3(after 2016) AWDIncluded wit...
€ 500,14
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
This pack fits the following vehicles, fitted with OEM lower engine mount 5Q0 198 037 B:Audi TT Mk3 (after 06/2015)Audi A3 8V (after 06/2015) 1.8 or 2.0 FWDSeat Leon Mk3 (after 2016) 1.8 or 2.0 FWDIncluded within this pack are the following parts:PFF85-501Front Arm Front BushPFF3-902GFront Arm Rear Bush Caster AdjustablePFR85-816Rear Trailing Arm Mounting BushPFF85-832Lower Engine Mount InsertThis...
€ 497,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1322 Upper Gearbox Mount Insert is made in our Yellow 70A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts
€ 36,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1322BLK Upper Gearbox Mount Insert is made in our Black 95A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts
€ 39,93
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1323 Upper Engine Mount Insert is made in our Yellow 70A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts
€ 39,93
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1323BLK Upper Engine Mount Insert is made in our Black 95A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reactio...
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reac...
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reac...
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
