ACL Main Bearing Kit (Krukas/Crank) 5M1219HX

 
Artikel 123 van 532
Tijdelijke aanbieding [NIEUWTAG]
  • Onze klanten waarderen ons met een 9.2 / 10
  • Gratis verzending boven € 250,- (NL-BE-LU)
  • MEER DAN 85.000 CAR-TUNINGS PARTS
  • 14 dagen bedenktijd*
    Uitzondering maatwerk- en speciaal bestelde producten
  • Heeft u vragen? BEL: +31 36 844 77 00
  • Live chat Support online
  • Veilig online betalen

Omschrijving

ACL Race Series performance engine bearings are identified from the standard range by the following suffixes:

  • H = ACL Race Series.
  • HX = ACL Race Series with 0.025mm (0.001 inch) extra oil clearance.

Detail ACL Bearings

  • The unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings.
  • Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 & 8 cylinder applications and feature:
  • High strength overlay plate with reduced thickness for improved fatigue properties
  • Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.
  • Increased crush for improved bearing retention
  • Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing.
  • Increased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.
  • 3/4 grooved Main Bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings.
  • Tight consistent wall tolerances to help you maintain consistent clearances.
  • Enlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts.

Acl Conrod Bearing Set 5M1219HX-STD

  • Oil Clearance: Standard
  • Half Type: nvt
  • Material:  Tri-metal
  • Minimum standard shaft size: 2.2435in / 56.985mm
  • Maximum standard shaft size: 2.2441in / 57.000mm
  • Minimum standard tunnel size: 2.4016in / 61.000mm
  • Maximum standard tunnel size: 2.4024in / 61.021mm
  • Maximum wall at crown: 0.0778in / 1.977mm
  • Maximum overall length: 0.8268in / 21.00mm

Notes: For engines equipped with thrust washers

De levertijd staat op 3-7 werkdagen, dit is geldt alleen als de lagers op voorraad zijn in Nederland, wij updaten u direct na order, heeft u haast neem dan contact op met ons per telefoon of email voor de beschikbaarheid van de door uw benodigde applicatie. (levertijd vanaf de fabriek kan oplopen tot 2-3 weken, of langer indien geen voorraad)

[descextra]
Cross reference:
Dit artikel is ook geschikt:

5M1219HX inklappen

Merk Model Uitvoering  
MITSUBISHI4G63 GEN II (7-bolt) ECLIPSE/TALON2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-92.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 1400HD 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 E85 1400HD 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 E85 HD2 GAS PORTED 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 1400HD, 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, HD2 GAS PORTED 5,72MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, 1400HD 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, HD2 GAS PORTED 5,72MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) FOR STROKER CRANK 100MM ECLIPSE/TALON2.0 16V (4G63 7-BOLT)5M1219HX
Mitsubishi4G63 - (1997 cc)Main Bearing Set5M1219HX
Mitsubishi4G64 - (2351 cc)Main Bearing Set5M1219HX
Mitsubishi4G64-S4 - (2351 cc)Main Bearing Set5M1219HX
Mitsubishi4G69 - (2378 cc)Main Bearing Set5M1219HX

5M1219HX inklappen

Merk Model Uitvoering  
MITSUBISHI4G63 GEN II (7-bolt) ECLIPSE/TALON2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-92.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 1400HD 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 E85 1400HD 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 E85 HD2 GAS PORTED 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 1400HD, 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR LONG ROD 156MM, HD2 GAS PORTED 5,72MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, 1400HD 5,72MM WALL TOOL STEEL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, 5,10MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) EVO 4-9 FOR STROKER CRANK 100MM, HD2 GAS PORTED 5,72MM WALL PINS2.0 16V (4G63 7-BOLT)5M1219HX
MITSUBISHI4G63 GEN II (7-bolt) FOR STROKER CRANK 100MM ECLIPSE/TALON2.0 16V (4G63 7-BOLT)5M1219HX
Mitsubishi4G63 - (1997 cc)Main Bearing Set5M1219HX
Mitsubishi4G64 - (2351 cc)Main Bearing Set5M1219HX
Mitsubishi4G64-S4 - (2351 cc)Main Bearing Set5M1219HX
Mitsubishi4G69 - (2378 cc)Main Bearing Set5M1219HX
Reviews
Heeft u vragen over of ervaring met dit product? En wilt u dat met anderen delen? Plaats dan hier uw review. Voor alle niet-productgerichte vragen of reacties verwijzen wij u graag naar onze FAQ of naar de klantenservice.
Send a friend
Wilt u iemand anders attent maken op een artikel dat u in onze webwinkel heeft gevonden? Vul dan onderstaand formulier in. Deze persoon krijgt via een e-mail het artikel van uw keuze te zien. U kunt er ook nog een persoonlijke boodschap bij vermelden.

Stuur de aanbeveling aan:


Afzender:


persoonlijk bericht:

Type de beveiligings tekst overSecurity Image

Vraag over dit product?
Heeft u een vraag over dit product, of kunt u niet het product vinden waar u naar op zoek bent? Stel hier uw vraag. Dhr. Mevr.
Ja, ik wil graag ook mijn email adres ook opgeven voor de nieuwsbrief


sluiten
Hier komt het formulier