Rear Lower Arm Front Bush Diagram Reference: 21 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :4B0505311 OEM 2 :4B0505312 OEM 3 :
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Lower Arm Front Bush Diagram Reference: 21 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :4B0505311 OEM 2 :4B0505312 OEM 3 :
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Lower Arm Front Bush Diagram Reference: 21 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :4B0505311 OEM 2 :4B0505312 OEM 3 :
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Rear Mounting Bush Diagram Reference: 21 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :33316770826 OEM 2 : OEM 3 :
€ 79,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits the later Phase II vehicle only.
€ 54,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-121-10.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
€ 54,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
€ 54,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 5 cylinder petrol models only
€ 49,30
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-121-12.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-121-12.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-121-10.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR85-1020KIT3 includes 6 polyurethane bushes and 3 stainless steel sleeves. This kit fits the T3 Syncro front diff, and the Iltis and T4 Syncro rear diff.
€ 141,06
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR85-1020KIT3 includes 6 polyurethane bushes and 3 stainless steel sleeves. This kit fits the T3 Syncro front diff, and the Iltis and T4 Syncro rear diff.
€ 141,06
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Please check bolt diameter before ordering.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Please check bolt diameter before ordering.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits into the voiding of the original bush with a 79mm wide bracket to reduce engine movement under acceleration. Additional NVH may be felt when fitting this part.
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits into the voiding of the original bush with a 79mm wide bracket to reduce engine movement under acceleration. Additional NVH may be felt when fitting this part.
€ 47,77
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part is designed to limit movement of the original voided rubber mount whilst being mindful of vibration transmitted to the vehicle and is recommended for diesel models.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part is designed to limit movement of the original voided rubber mount whilst being mindful of vibration transmitted to the vehicle and is recommended for diesel models.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part is designed to limit movement of the original voided rubber mount whilst being mindful of vibration transmitted to the vehicle and is recommended for diesel models.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an Insert and fits into the original bush which reduces the subframe movement.
€ 47,77
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an Insert and fits into the original bush which reduces the subframe movement.
€ 52,56
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an insert that fits into the voiding of the original bush to reduce movement. For a complete replacement bush, please use PFR5-722.
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
