PFF85-620R - Lower Engine Mount Large Bush (Std Diesel) - Powerflex A902-PFF85-620R - Diagr. REF: 20
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620R - Lower Engine Mount Large Bush (Std Diesel) - Powerflex A886-PFF85-620R - Diagr. REF: 20
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620R - Lower Engine Mount Large Bush (Std Diesel) - Powerflex A867-PFF85-620R - Diagr. REF: 20
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422 is a full replacement bush and is made using our Yellow 70A durometer material, recommended for standard or mildly tuned road cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 86,18
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422 is a full replacement bush and is made using our Yellow 70A durometer material, recommended for standard or mildly tuned road cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 86,18
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422 is a full replacement bush and is made using our Yellow 70A durometer material, recommended for standard or mildly tuned road cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 86,18
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422BLK is a full replacement bush and is made using our Black 95A durometer material, providing the stiffest link between subframe and chassis, for hard track and motorsport use. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 98,74
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422BLK is a full replacement bush and is made using our Black 95A durometer material, providing the stiffest link between subframe and chassis, for hard track and motorsport use. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 98,74
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422BLK is a full replacement bush and is made using our Black 95A durometer material, providing the stiffest link between subframe and chassis, for hard track and motorsport use. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 98,74
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A165-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A164-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A148-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A147-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A134-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
€ 80,66
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part replaces the original bush in bracket and fits 2.0L diesel models. PFF60-524 is designed to allow a controlled amount of engine movement through voids in the material. The kit includes polyurethane inserts that further reduce engine movement, perfect for track days or vehicles running increased power.
€ 69,70
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part replaces the original bush in bracket and fits 2.0L diesel models. PFF60-524 is designed to allow a controlled amount of engine movement through voids in the material. The kit includes polyurethane inserts that further reduce engine movement, perfect for track days or vehicles running increased power.
€ 69,70
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part replaces the larger bush in extruded bracket to suit 1.4, 1.6 and 2.0L petrol engines and also 1.5L diesel engines. For vehicles with a cast bracket use PFF60-524 or a rubberized bracket use either PFF60-820 or PFF60-920. PFF60-526 is designed to allow a controlled amount of engine movement through voids in the material. The kit includes polyurethane inserts that can be fitted to further...
€ 96,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF60-8025BLK sees both bushes being made in our hardest Black 95A durometer material, providing the stiffest link between engine and chassis, for hard track and motorsport use.. An increase in NVH should be expected when fitting this part. For an insert only, use PFF60-820 (only fits pressed, rubber-coated OEM mount). Not suitable for diesels.
€ 223,32
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The ha...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The ha...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is not for automatic gearbox mounts. This product is an insert for the original mount. It is not a full replacement bush. Please check the voiding on the original bush on diesel models to make sure insert will fit.
€ 44,79
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G and J. - On the VW Corrado and Passat the mount will only fit models with the V6 engine.
€ 91,33
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G and J. - On the VW Corrado and Passat the mount will only fit models with the V6 engine.
€ 91,33
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting. To suit the variable requirements of the i30N driver, our new ...
€ 47,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting. To suit the variable requirements of the i30N driver, our new ...
€ 47,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting. To suit the variable requirements of the i30N driver, our new ...
€ 47,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved. To suit the variable requirements o...
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles. To suit the variable requirements of the i30N driver, our ne...
€ 44,65
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles. To suit the variable requirements of the i30N driver, our ne...
€ 44,65
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the origin...
€ 37,53
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the origin...
€ 37,53
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the origin...
€ 37,53
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes only. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 2...
€ 39,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes only. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 2...
€ 39,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes only. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 2...
€ 39,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 225%Bl...
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-122 Lower Torque Mount - Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability....
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
PFF26-122 Lower Torque Mount - Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability....
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
PFF26-122P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine...
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
PFF26-122P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine...
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
PFF26-122P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine...
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
