Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration.
€ 46,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration.
€ 46,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration.
€ 51,69
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1921 Rear Subframe Rear Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1921 Rear Subframe Rear Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1921 Rear Subframe Rear Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1921 Rear Subframe Rear Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This bush fits the following RWD vehicles: 964 C2 1990-1994 Manual - Transmission type G50.03 / G50.04 / G50.05 964 Turbo 1991-1992 Manual - Transmission type G50.52 964 C2 1992-1994 Tiptronic - Transmission type A50.02 / A50.0 993 C2 1994-1998 Manual - Transmission type G50.20 / G51.21 993 Carrera RS 1995 Manual - Transmission type G50.31 / G50.32 / G50.33 993 C2 1994-1998 Tiptronic - Transmissi...
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits Alfa 147 and 156 2.0 16v Twin Spark and JTS models with welded steel bracket only. Fits Alfa 145 and 146 2.0 16v Twin Spark and 2.0 16v Quadrifoglio models with welded steel bracket only.
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-121-10.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
€ 54,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
€ 54,01
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits the engine and chassis position on V6 and 1.9 JTD/JTDM models only.
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 5 cylinder petrol models only
€ 49,30
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-121-12.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
