PFR5-4025 is a replacement bush that includes aluminium sleeves with built-in support to increase control of rear diff movement and replaces all four bushes in the original rear diff front mounting bracket.
€ 90,90
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-4025 is a replacement bush that includes aluminium sleeves with built-in support to increase control of rear diff movement and replaces all four bushes in the original rear diff front mounting bracket.
€ 99,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-4025 is a replacement bush that includes aluminium sleeves with built-in support to increase control of rear diff movement and replaces all four bushes in the original rear diff front mounting bracket.
€ 99,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR85-1020KIT3 includes 6 polyurethane bushes and 3 stainless steel sleeves. This kit fits the T3 Syncro front diff, and the Iltis and T4 Syncro rear diff.
€ 141,06
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an insert that fits into the voiding of the original bush to reduce movement. For a complete replacement bush, please use PFR5-722.
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Please check bolt diameter before ordering.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Please check bolt diameter before ordering.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Please check bolt diameter before ordering.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Please check bolt diameter before ordering.
€ 54,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits into the voiding of the original bush with a 79mm wide bracket to reduce engine movement under acceleration. Additional NVH may be felt when fitting this part.
€ 47,77
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits into the voiding of the original bush with a 79mm wide bracket to reduce engine movement under acceleration. Additional NVH may be felt when fitting this part.
€ 47,77
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part is designed to limit movement of the original voided rubber mount whilst being mindful of vibration transmitted to the vehicle and is recommended for diesel models.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-132...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-13...
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
