PFF5-5452BLKEngine Mount Insert uses the same design as the Road Series part but with our 95A Black Series material to provide uncompromisedengine stability. Mount rigidity is increased by a huge 180%.An increase inNVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted....
€ 49,30
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These are complete replacement bushes. For inserts to fill the voiding of the original bushes, use PFR5-531. Due to the size of the parts, we can only fit 2 into 1 box and therefore have to supply 2 boxes for a complete car set of 4 bushes.
€ 119,14
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These are complete replacement bushes. For inserts to fill the voiding of the original bushes, use PFR5-531. Due to the size of the parts, we can only fit 2 into 1 box and therefore have to supply 2 boxes for a complete car set of 4 bushes.
€ 119,14
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For all 986/987 up to 2009 with engine codes M9625, M9626, M9720, M9721 and M9722. For an insert to be used with the original bush, please use PFR57-521BLK. Hexagon profile allows for controlled engine movement and limits contact for reduced vibration.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits the 1ZZ and 2ZZ Toyota engine only. PFF34-602 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from such a vehicle. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expecte...
€ 46,17
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits the 1ZZ and 2ZZ Toyota engine only. PFF34-602 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from such a vehicle. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/tra...
€ 50,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The h...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The h...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The h...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The h...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The h...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L petrol and diesel models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the great...
€ 55,10
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L petrol and diesel models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the great...
€ 55,10
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.6T RenaultSport Clios only. The original oil-filled engine mount softens and perishes with age, losingitsability to dampen effectively andpromoting unwanted engine movement. By fitting our new insert into the voiding of the OE rubber bush, it acts as a buffer by restricting movement within the bush thus improving throttle response, sharpeninggear changes, and reducingwheel hop.A small incre...
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.6T RenaultSport Clios only. The original oil-filled engine mount softens and perishes with age, losingitsability to dampen effectively andpromoting unwanted engine movement. By fitting our new insert into the voiding of the OE rubber bush, it acts as a buffer by restricting movement within the bush thus improving throttle response, sharpeninggear changes, and reducingwheel hop.A small incre...
€ 44,79
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF60-8025 is significantly stiffer than the OE mount and recommended for standard or mildly tuned road cars, using a combination of our Yellow 70A and Purple 80A durometer materials. A small increase in NVH, usually at idle should be expected when stiffening the connecting mount between the engine/transmission and subframe.
€ 202,99
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits Clio III Sport and Megane II Sport models inc RS. - This is an insert that fits into and fills voids in the original rubber bush in lower engine mount OE part numbers: 8200042454. This mount is rubber coated. it has been superseded with an alloy extruded bracket part number 8200777542 the insert wont fit the later part. An insert PFF60-526 is available for this part
€ 39,93
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an insert that fits into and fills voids in the original rubber bush in lower engine mount. Fits Clio III ,Megane II, Kangoo II and Scenic II 1.5L Diesel models. Also fits 1.6L Petrol Clio III and Kangoo II.
€ 37,53
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an insert that fits into and fills voids in the original rubber bush in lower engine mount. Fits Clio III ,Megane II, Kangoo II and Scenic II 1.5L Diesel models. Also fits 1.6L Petrol Clio III and Kangoo II.
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
7700 RACE PAD SET - 13 CMPD 20 MM
€ 803,72
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7700 RACE PAD SET - 84 CMPD 20 MM
€ 535,44
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7735 RACE PAD SET - 01 CMPD 20 MM
€ 257,66
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7751 RACE PAD SET - 01 CMPD 20 MM
€ 277,10
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7770 RACE PAD SET - 01 CMPD 20 MM
€ 762,14
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7551 RACE PAD SET - 39 CMPD 20 MM
€ 346,40
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7853 RACE PAD SET - 01 CMPD 20 MM
€ 217,56
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 8,95 (Nederland)
PFF16-720BLK Lower Engine Mount Insert is made in our Black 95A durometer material for increased mount longevity and performance. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceler...
€ 46,17
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
We are pleased to introduce PFF5-4020BLK and PFF5-4021BLK Engine Mount Insert Kits, intermediate alternatives to the BMW Motorsport aluminium inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in our Black 95A durometer material, they are designed to fit the voiding of the OE mounts snuggly to restrict engine movement, perfect for those with tuned track cars...
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
We are pleased to introduce PFF5-4020BLK and PFF5-4021BLK Engine Mount Insert Kits, intermediate alternatives to the BMW Motorsport aluminium inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in our Black 95A durometer material, they are designed to fit the voiding of the OE mounts snuggly to restrict engine movement, perfect for those with tuned track cars...
€ 52,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting the new insert, PFR68-120 Engine Mount Insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust down pipe, hoses and wiring.An increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effecti...
€ 40,44
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting the new insert, PFR68-121 Engine Mount Insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses and wiring.A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are eff...
€ 36,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-122-12BLK Lower Torque Mount - Motorsport uses our Black 95A material for all bush components to maximise mount stiffness, resulting in a mega 1300% increase over the stock mount for uncompromising powertrain control for serious track and motorsports use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for u...
€ 376,00
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7700 RACE PAD SET - 01 CMPD 20 MM
€ 789,86
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7700 RACE PAD SET - 01 CMPD 20 MM
€ 388,08
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7735 RACE PAD SET - 13 CMPD 20 MM
€ 257,66
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7736 RACE PAD SET - 01 CMPD 20 MM
€ 831,44
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7748 RACE PAD SET - 95 CMPD 20 MM
€ 184,31
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 8,95 (Nederland)
7770 RACE PAD SET - 11 CMPD 20 MM
€ 637,42
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
7782 RACE PAD SET - 83 CMPD 20 MM
€ 200,93
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 8,95 (Nederland)
7912 RACE PAD SET - 93 CMPD 20 MM
€ 540,41
Op bestelling leverbaar
3-4 weken
Verzendkosten: € 0,00 (Nederland)
Lower Torque Mount Insert Diagram Reference: 20 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 : OEM 2 : OEM 3 :
€ 33,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Diff Rear Mount Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :33112282482 OEM 2 :33117837278 OEM 3 :
€ 72,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Mounting Bush Diagram Reference: 20 Aantal Nodig: 4 Pack Size: 4 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :8E0505145 OEM 2 : OEM 3 :
€ 100,26
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Mounting Bush Diagram Reference: 20 Aantal Nodig: 4 Pack Size: 4 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :8E0505145 OEM 2 : OEM 3 :
€ 110,35
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Mounting Bush Diagram Reference: 20 Aantal Nodig: 4 Pack Size: 4 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :8E0505145 OEM 2 : OEM 3 :
€ 110,35
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Diff Mounting Bush Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :NA0128890 OEM 2 : OEM 3 :
€ 66,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Diff Mounting Bush Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :NA0128890 OEM 2 : OEM 3 :
€ 73,25
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
