These inserts fits into the original bush, OE part number 191199262. They do not fit Hydro mounts as fitted to the 16v GTi models with engine codes KR, PL, 9A and G60 with engine code PG
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fits into the original bush, OE part number 191199262. They do not fit Hydro mounts as fitted to the 16v GTi models with engine codes KR, PL, 9A and G60 with engine code PG
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Not recommended for 3cyl or diesel engined vehicles due to the potential for increased vibration. PFF80-1120 fits this type of mount only. Please check the picture below before ordering.
€ 37,53
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF44-520P is suitable for track car/tuned models, it is a stiffer bush and may give more vibration This is a complete bush to fit into the original mount. For an insert only please use PFF44-521. Please note these are an upgrade, some additional vibration may be felt.
€ 63,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Supplied as a Polyurethane bush and CNC machined bracket combination, the Yellow 70A and Purple 80A materials in PFF16-530 suits fast road usage. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned stage 1 vehicles. For an insert only use PFF16-520.
€ 205,39
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Supplied as a Polyurethane bush and CNC machined bracket combination, the Yellow 70A and Purple 80A materials in PFF16-530 suits fast road usage. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned stage 1 vehicles. For an insert only use PFF16-520.
€ 205,39
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Supplied as a Polyurethane bush and CNC machined bracket combination for dedicated hard track or motorsport use, PFF16-531BLK uses our Black Series 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs. This is THE product for ultimate engine movement control but an increase in NVH should be expected when fitting. For an insert only use PFF16-520BLK.
€ 225,71
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Supplied as a Polyurethane bush and CNC machined bracket combination for dedicated hard track or motorsport use, PFF16-531BLK uses our Black Series 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs. This is THE product for ultimate engine movement control but an increase in NVH should be expected when fitting. For an insert only use PFF16-520BLK.
€ 225,71
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Supplied as a Polyurethane bush and CNC machined bracket combination, the Purple 80A materials in PFF16-530P are better suited to those vehicles above stage 1 being used for fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved. For an insert only use PFF16-520.
€ 205,39
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Supplied as a Polyurethane bush and CNC machined bracket combination, the Purple 80A materials in PFF16-530P are better suited to those vehicles above stage 1 being used for fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved. For an insert only use PFF16-520.
€ 205,39
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Supplied as a Polyurethane bush and CNC machined bracket combination for dedicated hard track or motorsport use, PFF16-531BLK uses our Black Series 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs. This is THE product for ultimate engine movement control but an increase in NVH should be expected when fitting. For an insert only use PFF16-521BLK.
€ 225,71
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Suitable for petrol models only. This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. For a complete, replacement bush please use PFF12-720.
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620 is made using our Yellow 70A durometer material and is suitable for standard petrol models or mildly tuned diesel models. For track/tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620 is made using our Yellow 70A durometer material and is suitable for standard petrol models or mildly tuned diesel models. For track/tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620 is made using our Yellow 70A durometer material and is suitable for standard petrol models or mildly tuned diesel models. For track/tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620 is made using our Yellow 70A durometer material and is suitable for standard petrol models or mildly tuned diesel models. For track/tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620BLK is made using our Black 95A durometer material and is for heavily tuned vehicles or Motorsport use. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade and additional noise and vibration will be experienced.
€ 72,38
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620BLK is made using our Black 95A durometer material and is for heavily tuned vehicles or Motorsport use. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade and additional noise and vibration will be experienced.
€ 72,38
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620BLK is made using our Black 95A durometer material and is for heavily tuned vehicles or Motorsport use. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade and additional noise and vibration will be experienced.
€ 72,38
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620BLK is made using our Black 95A durometer material and is for heavily tuned vehicles or Motorsport use. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade and additional noise and vibration will be experienced.
€ 72,38
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620P is made using our Purple 80A durometer material and is suitable for track car/tuned models. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620R - Lower Engine Mount Large Bush (Std Diesel) - Powerflex A901-PFF85-620R - Diagr. REF: 20
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620R - Lower Engine Mount Large Bush (Std Diesel) - Powerflex A883-PFF85-620R - Diagr. REF: 20
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422 is a full replacement bush and is made using our Yellow 70A durometer material, recommended for standard or mildly tuned road cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 86,18
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422 is a full replacement bush and is made using our Yellow 70A durometer material, recommended for standard or mildly tuned road cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 86,18
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422 is a full replacement bush and is made using our Yellow 70A durometer material, recommended for standard or mildly tuned road cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 86,18
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A212-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A163-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A133-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-1923 - Lower Torque Mount Large Bush (Fast Road) - Powerflex A1139-PFF85-1923 - Diagr. REF: 20
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
€ 80,66
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
€ 88,79
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Our polyurethane insert kit ships with a bolt spacing sleeve made using our Shore A 95 Black material to take up the excessive tolerance on the bore of the original mount to further reduce en...
€ 39,93
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Our polyurethane insert kit ships with a bolt spacing sleeve made using our Shore A 95 Black material to take up the excessive tolerance on the bore of the original mount to further reduce en...
€ 39,93
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Insert for the original bush. An increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Our polyurethane insert kit ships with a bolt spacing sleeve made using our Shore A 95 Black material to take up the excessive tolerance on the bore of the original mount to further reduce engine movement under load.
€ 43,92
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 43,85
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert.
€ 48,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The ha...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The ha...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The ha...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The ha...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The ha...
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This product is an insert for the original mount, it is not a full replacement bush. It is designed to fit the Z20LET Turbo 16v and Z22SE 16v engines. It will not fit vehicles fitted with automatic transmission. If fitting to any other engine, please check that our bush and the voiding on the original bush match.
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is not for automatic gearbox mount. This product is an insert for the original mount. It is not a full replacement bush. Please check the voiding on the original bush on diesel models to make sure insert will fit.
€ 40,73
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
