PFR5-422P - Rear Subframe Rear Mounting Bush (Fast Road) - Powerflex A131-PFR5-422P - Diagr. REF: 20
PFR5-422P is a full replacement bush and is made using our Purple 80A durometer material, recommended for more heavily tuned road or occasional track cars. For inserts that fit into the OE bush use PFR5-421 for 33316758260 or PFR5-1921 for 33316792510.
€ 94,82
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Our polyurethane bushes are ideal replacements for worn or damaged parts. Engine mount bushes are particularly prone to cracking of the rubber because of a large amount of voiding in the material to allow for excessive movement. The hexagonal profile allows for controlled engine movement and limits contact for reduced vibration. Fits the later Phase II vehicle only.
€ 65,78
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part fits as an insert for the Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting,...
€ 48,57
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This part fits as an insert for the Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting,...
€ 53,36
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles. To suit the variable requirements of the i30N driver, our new part ...
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting. To suit the variable requirements of the i30N driver, our new ...
€ 47,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting. To suit the variable requirements of the i30N driver, our new ...
€ 47,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting. To suit the variable requirements of the i30N driver, our new ...
€ 47,34
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved. To suit the variable requirements o...
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved. To suit the variable requirements o...
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles. To suit the variable requirements of the i30N driver, our ne...
€ 44,65
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles. To suit the variable requirements of the i30N driver, our ne...
€ 44,65
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles. To suit the variable requirements of the i30N driver, our ne...
€ 44,65
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles. To suit the variable requirements of the i30N driver, our ne...
€ 44,65
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes only. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 2...
€ 39,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes only. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 2...
€ 39,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 225%Bl...
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For C510.5 and C514 gearboxes. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 225%Bl...
€ 43,05
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the origin...
€ 37,53
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the origin...
€ 41,45
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the origin...
€ 41,31
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFR34-1120BLK Transmission Mount Bush Insert Kit is made in our Black 95A material for track/motorsport use and designed to fill the voiding of the OE rubber. This restricts movement within the mount to provide a more precise and settled engine and transmission response during on/off throttle acceleration and deceleration, with improved shift performance. A small increase in NVH, usually at idle, ...
€ 54,23
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF26-122 Lower Torque Mount - Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability....
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
PFF26-122P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine...
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
PFF26-122P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine...
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
PFF26-122P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine...
€ 341,80
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 0,00 (Nederland)
Designed to replace the softer rubber voided OE mount that is prone to cracking, allowing for excessive engine movement and wheel hop, PFF5-220 Lower Torque Mount Bracket and Bush (Yellow 70A and Purple 80A) is 300% stiffer than the worn OE mount and recommended for fast road use for standard or mildly tuned cars.Combining a CNC machined aluminium lower torque mount with various durometer bush opt...
€ 220,27
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF30-320BLK - O/S Upper Engine Stabiliser Mount Bush - Powerflex A544-PFF30-320BLK - Diagr. REF: 20
O/S Upper Engine Stabiliser Mount Bush Diagram Reference: 20 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :7648233 OEM 2 :7553268 OEM 3 :
€ 45,67
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Engine Mount to Stabiliser Bush Diagram Reference: 20 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :46420429 OEM 2 :60814467 OEM 3 :60677745
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Engine Mount to Stabiliser Bush Diagram Reference: 20 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :46420429 OEM 2 :60814467 OEM 3 :60677745
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Engine Mount to Stabiliser Bush Diagram Reference: 20 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :46420429 OEM 2 :60814467 OEM 3 :60677745
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Front Mounting Bush Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :33311091422 OEM 2 : OEM 3 :
€ 89,59
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Front Mounting Bush Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :33311091422 OEM 2 : OEM 3 :
€ 81,46
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Mounting Front Insert Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 : OEM 2 : OEM 3 :
€ 46,46
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Subframe Mounting Front Insert Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 : OEM 2 : OEM 3 :
€ 42,25
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For WRX/STI models 2011-2014
€ 37,53
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Shock Top Mount Upper Bush Diagram Reference: 20 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :6066398 / 81AB18198AA / 81AB 18198 AA OEM 2 : OEM 3 :
€ 39,93
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Steering Rack Mounting Bush Kit Diagram Reference: 20 Aantal Nodig: 1 Pack Size: 1 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :45516-17030 D-Shaped OEM 2 :45517-16040 Round OEM 3 :
€ 53,22
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is a complete bush to fit into the original mount. For an insert only please use PFF44-521BLK.
€ 69,70
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an insert that fits into the voids in the original bush. For a complete bush please use PFF44-520. Not recommended for 3 cylinder engines.
€ 46,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This is an insert that fits into the voids in the original bush. For a complete bush please use PFF44-520BLK. Not recommended for 3 cylinder engines.
€ 51,69
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles.
€ 81,46
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles.
€ 81,46
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles.
€ 81,46
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles.
€ 81,46
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits 1.4L US models including Abarth. This part fits into voids in original bush. Please check void pattern is the same as on your vehicle. For a complete mount please use PFF16-532BLK.
€ 36,81
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use
€ 49,95
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
